Premier-mounts WMK-027 Manuel d'utilisateur télécharger pdf (Page 5)

Installation Instructions Page 5

Wood Stud Installation

DEAD CENTER MUST BE LOCATED ON THE STUD FOR CORRECT AND SAFE INSTALLATION.

Step 1. Use an electronic stud nder

(commercially available) to

locate the center of the stud

that is in the wall.

Step 2. Use a pencil to mark the rst

mounting hole, just above

your height mark (from

page 4).

Step 3. Use the level to make sure

the wall plate is level from

top to bottom. After

determining the desired

viewing height, place the

wall plate over the rst hole

and use a pencil to mark the

rest of the holes.

Wood Stud

Stud nder

Marking

(from page 4)

Wood Stud

Marking

Wall

Plate

Do NOT over-tighten lag bolts when attaching the mount to the wall. Improper installation may result in personal injury

or damage to property.

WMK-027

Step 4. Once the holes have been

marked, use a 1/4” drill bit

and portable drill to drill the

pilot holes.

Step 5. After the pilot holes have

been drilled, use four (4)

5/16” x 3” lag bolts and four

(4) at washers to mount the

wall plate to the wooden

stud. Use a 1/2” socket and

socket wrench to nish this

step.

Step 6. Insert and gently tap the wall

plate covers into place.

Drill

Marking

Socket

Lag Bolt and

Flat Washer

Wall

Plate

Completed Installation

Wall Plate

Covers

1 2 3 4 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire

Premier-mounts WMK-027 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la télévision Premier-mounts WMK-027